Quick & Clear Epoxy 1:1 Ratio

***BUY MORE AND SAVE****

At check-out ENTER the corresponding code into the promo section and receive the instant discount, Promo is valid only on our 10L, 15L and 20L kits

•  DISCOUNT CODE "EPOXY2" save $10 off the purchase of 2 x 10L/2.6 GALLON Epoxy Kits 
•  DISCOUNT CODE "EPOXY3" save $25 off the purchase of 3 x 10L/2.6 GALLON Epoxy Kits 
• DISCOUNT CODE "EPOXY4" save 10% off the purchase of 4 x 10L/2.6 GALLON Epoxy Kits 
• DISCOUNT CODE "EPOXY5" save 11% off the purchase of 5 x 10L/2.6 GALLON Epoxy Kit 
• DISCOUNT CODE "EPOXY6" save 12% off the purchase of 6 x 10L/2.6 GALLON Epoxy Kit 

Quick & Clear Epoxy ... Fast cure, suitable for large Large surface coverings such as tables, Bar tops and counters, Art Canvas, Also DIY resin art, Epoxy table touch ups, Coasters, Jewelry, Molding, Encapsulation

• Easy to use 1:1 mixing ratio
• UV and HALS stabilized for unparalleled Anti-yellowing protection
• Non-toxic. Safe for home use when used in a well ventilated area.
• No VOCs. No BPA. No fumes. Non-flammable. Certified food safe.
• High-gloss. Self-levelling. Formulated specifically for art. 
• Crystal clear, high see through, yellow resistance
  Thin liquid easy to handle, no bubble, self-Leveling
  Excellent color stability with pigments

DESCRIPTION
Quick & Clear epoxy, is a two-component resin system. Designed to be ULTRA clear results, used for items like Charcuterie boards, Jewellery,  DIY resin art, Coasters, Coating Art Canvas. Resin Art, also perfect for large surface coatings like table.

For best results if you are pouring Clear layer epoxy in 1/4 pour segments. This epoxy can pour up to 4 inches in depth (please contact us for tips)

Initial cure time at 58-70 Degrees F - 2-4 hours (pending shop temp and thickness of pour)

Full cure time at 58-70 Degrees F - 7-9 hours (Pending shop temp and thickness of pour)

Shelf life 10 months after purchase

FIRST-AID

1. EYES: Flush with copious amounts of water lifting lids and removing contact lenses to ensure complete irrigation. Get medical attention.
2. SKIN: Flush with water and then wash with soap and water, launder contaminated clothing before reuse. Get medical attention if irritation persists.
3. INHALATION: Remove to fresh air and assist breathing as necessary. Get Medical attention.
4. INGESTION: If appreciable amounts have been swallowed, get medical attention.

DIRECTIONS 

1. Make sure wear safety glasses during mixing and pour of resin
2. Mix 1 parts A with 1 part B by weight into cleaned mixing container. Slowly mix to avoid bubbles, carefully scrape the wall and bottom of container, ensuring no streaks.
3. Pour slowly into your mold, allow 30-60min for the bubbles to rise and then lightly torch to pop bubbles,
4. Pot life: Starts curing in 2-4 hours and final curing is in 7-9 hours depending on your shop temperature.
5. For best results, be used at temperature 70 to 80 degrees F, in room clean, dry and dust free. The relative humidity should not be more than 85%.
6. De-mold -  We do recommend waiting for 12hrs after pour, but it is possible to start sanding once you do a indent touch test with your finger nail.

STORAGE

Recommended 55 degrees F. to 85 degrees F., with tightly sealed lids, avoid from direct sunlight