Superior material and quality than the most available online at similar pricing.
Normally ship's out in 1-2 days
Diamond Shaped Hangers
Single Door
A simple steel belt in the shape of a reversed J is linked to a diamond-shaped piece which functions as a rolling support with three mounting points for a wood door with a 34.9 mm (1 3/8 inch.) or 44.45 mm (1 3/4 inch.) thickness. The visible steel hardware set is designed for easy installation of a standard wood door.
- Finish : Black, made of Steel
- Track finish : Black, made of Steel
- Weight Capacity per Door: 15 kg to 100 kg
- Required Door Dimensions: Thickness of 1 3/8 in to 1 3/4 in (34.9 mm to 44.5 mm) and a width of 24 in to 40 in (610 mm to 1010 mm)
- Soft-Closing: No
- Roller type and position: Ball Bearing, Upper
- Track mount and type: Wall Mount, Flat Bar
- Track Length: 78 3/4 in (2000 mm)
- Groove at the bottom of Door (Width x Depth): 9/32 in (7 mm) x 25/32 in (20 mm)
- Groove Needed for Guiding System: No
- Mounting hardware included for an easy installation (Set of screws)
- Door Material: Wood (Doors NOT included, only the mounting hardware)
- Sold per kit
- For example, it is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system.
- Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough space for the door.
- Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer
POM nylon wheel, smooth, durable and quiet.